Description du produit
wiTech MicroPod 2 for Chrysler, software is V17.04.27 ,supports diagnosis and programming ,with Multi-language , provides 100% CAN coverage for Chrysler, Dodge, Jeep and Fiat. The problem has been fixed for this version!
wiTech MicroPod 2 Diagnostic Programming Tool for Chrysle Dodge Jeep Fiat and Ram
wiTECH MicroPod 2 Diagnostic Tool :
1. Software Version: V17.04.27
2. Best firmware version that fix problems
3. Multi-Languages supported: English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese
4. PC-Based: Requires PC connection
5. Must connect to network to work, otherwise will prompt you to activate software.
6. Operating System: Windows 7
Using Tips (Important): Network connection needed.
First connect MicroPodII to vehicle, if the red indicator turns on, then connect to laptop and run software.
wiTECH software crack download free:
wiTECH micropod 2 V17.04.27
Download chrysler wiTECH desktop software:
wiTECH V17.04.27 Software Download
MicroPOD II features:
Supports all the latest technologies and vehicle platforms including the latest Chrysler and Fiat Vehicles.
Works as a direct replacement for the wiTECH POD
MicroPOD II function:
1) It can be used as diagnostic and programming tool by the dealerships. It replaces your StarMobile, StarScan, and wi-TECH POD, and enables your technicians to increase their productivity and provide world-class diagnostic services to your customers.
2) A separate Tech Authority Subscription is required to access to Module Re-Flash Programming, TSBs, wiring diagrams, and repair information.
MicroPOD II model year coverage:
Although small in stature, this dongle-style device offers 100% CAN - equipped coverage to 2016 for Chrysler, Dodge, Jeep Fiat and Ram vehicle platforms.
Note: DRB III emulator has NOT been tested with our Micropod II hardware. The package does not include the DRB3 emulator. You are at your risk. If you need to use DRB3, better choose wiTech VCI Pod (SP179
1pc x MicroPOD II interface
1pc x USB cable
1pc x CD
V188 Renault Can Clip:
Pour toute question, veuillez nous contacter à:
Whatsapp: +86 18205950686
Méthode d'expédition et délai de livraison:
Entrepôt au Royaume-Uni: 7-10 jours ouvrables. Il y a des produits chauds dans l'entrepôt britannique. Expédier de l'entrepôt britannique n'est pas nécessaire pour payer les droits de douane.
Expédition DHL: 5-7 jours ouvrables. Parfois, il y a des droits de douane, nous allons donc déclarer un prix inférieur sur la facture. Si l'adresse est une région éloignée, vous devez payer le fret à distance ou nous l'enverrons par une autre méthode.
Yanwen Express: 7 à 10 jours ouvrables, généralement pas besoin de payer les droits de douane pour les pays européens et il n'y a pas de régions éloignées.
Solve WITECH registration issues
Chrysler, Jeep, Dodge diagnostic VCI interface wiTECH MicroPod 2 software updated!! here, free download wiTECH software v17.04.27 and get the how-to’s of wiTECH 2 app installation to install Chrysler wiTECH software yourself! Also, a wiTECH MicroPod 2 v17.04.27 user manual of key programming is attach here for you.
Operation system of wiTECH 2 download: Windows XP; Windows 7
THE MOST IMPORTANT NOTES:
Part 1: v17.04.27 wiTECH download link:
It’s wiTECH software crack
No need password for wiTECH MicroPod 2 login
No need wiTECH software license
The date of the computer must be the same as the fact
The computer must not be connected to the Internet
Connect the machine to the MicroPod 2 to open the wiTECH software
The system may ask you to turn off the software and turn it on for registration again. Repeat it for several times. Then you can use it normally
Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack:
Step 1 install AdobeAIRInstaller.exe
Step 2 install jre-6u45-windows-i586.exe
Step 3 install wiTECH_Install_17.04.27.exe
Step 4 Restart the computer
wiTECH diagnostic tool is ready for use!
Part 3: How to use wiTech MicroPod II clone for auto key programming
Plug the MicroPOD II device into the OBD port and connect the USB cable from the device to your laptop. This wakes the BUS on the car.
Manually enter the VIN of the vehicle. This gives you access to the module list. Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.
Next select “Miscellaneous Functions,” then “Program Ignition Fobix.” At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.
After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIX within 30 seconds (the FOBIX needs to be located near the center console during this procedure).
wiTech Micropod2 red light flashes microprocessor 1 is unresponsive solution:
Programming of the Ignition FOBIX is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key.
Things to Remember:
You must be online to program the key.
The PIN Code is only good for one session, which lasts 72 hours. After 72 hours the pin code expires.
If you input the wrong code for three-time it locks the BCM and you cannot service the vehicle for 24 hours.
The key is one-time programmable. Once married to the vehicle it is locked to the car forever. The key can be erased from the car and put back into the same car, but can’t be switched to another car.
The placement of the key during initialization is important. It needs to be placed either behind the shifter or in the center console.
I was ready to connect the wiTECH2 Micropod 2 interface to diagnose Chrysler 300M, but after i connected the adapter with laptop, the MicroPod2 indicator light flashed and software prompted error message “microprocessor 1 is unresponsive”. What’s the problem?
Software is not compatible with hardware/firmware.
We have several wiTECH2 Micropod 2 Chrysler diagnostic scan tools clone (SP271-C,SP271-B,SP271), they are made by different manufacturer. Software cannot be mixed used. i.e SP271-C wiTech software can work with SP271-C Micropod II firmware. Please use the default software CD in package.
Please follow the correct steps to connect the micropod2
Connect wiTech Micropod2 to vehicle first
If the red indicator light turn on, then connect wiTech to laptop
Open wiTech software (if software detect newer wiTech version,it will run an upgrade.Wait the upgrade completed. If it does not prompt to update software to newer version, just run software)
If you connect to laptop first (power by USB cable) and run software immediately, software and firmware will automatically synchronous upgrade and that will lead to the firmware failure. MUST CONNCT THE DEVICE TO VEHICLE.
If the red indicator flashes, the firmware is damaged. You have to send it back to repair.